HI,
We plan to Install a Gas Turbine but The temperature and humidity of the outside air vary depending on the date and time and can reach the following values:
Relative humidity 72%
Maximum ambient temperature 47 c°
The question that arises is the following:
Is the performance of the turbine...
Hi,
Thank you for response georgeverghese.
Yes we will use a catalyst.
Could you plesase explain hiw did you calculate the quantity of H2.
Kind regards.
Hi,
Yes i agree this is the second step but i was talking about total sulphur eg:
CH3SH+H2=CH4+H2S
H2S++ZNO=ZNS+H2O
So first equation need H2 .
Kind regards.
Hello all,
Can some one help me to calculate the quantity of hydrogen necessary for the desulfurization of natural gas knowing that :
gas flow=217 kg/h
Total sulphur content (ppmw)=40
Required toal sulphur (ppmw)=1
Is there a good practice wich help to minimise the consumption of H2 knowing...
Hi
Please could an expert explain why we should specify the reference O2 dry condition to apply the flue gas emission limits at GTG stack and boiler stack.
Best reagards.
yes I agree with you the question is vast
I don't have enough experience with performance tests. I would like to know the impact of climatic conditions,temperature and relative humidity, on the equipments (exchanger,compressor,pump,air cooler) during performance tests.
I've heard of simulation...
Hi
If summer or winter Performance Test conditions are not observed during Performance Test, then how will carryout Summer or winter Performance Testing as per actual site conditions
KIND REGARDS
Hi
Does anyone have worked in a laboratory who has experience with this area
1/Steam :I was talking about online analysis if it is possible and what are the parameters to respect.
2/liquid nitrogen:a purity of 99.9% is required for purges
3/water: there is a whole list of specs to check and the...
Hi,
I need your help to prepare the list of laboratory equipements and tools for our new utilies.
N2 liquid,industrrial water,cooling water,demin water,Boiler feed water,potable water
Kind regards.
Hi all
Is it necessary to consider monsoon weather conditions for HVAC heating & cooling load calculations?
If yes, what is the wise monsoon weather conditions should i take into consideration?
Kind regards
Hi,
Does anyone know if there is a regulation, standards, practices (in any country) which allows to evaluate the possibility of routing two products in the same transfer line and the same loading arm?
The situation I am thinking of is that linear alkyl benzene and ethylene will be transferred...
HI,
I am a beginner in the study of engineering and i need your help
Is it wise to consider 20% over design for all utility to cover any change expected in process during engineering?
Please advice.
Best regards
HI
I need your help
Can we direct an effluent that does not contain H2S only traces of NH3 with a large flow to the sour water system instead of HC close draIn to mix it with an acid flow that contains a significant quantity of H2S to be stripped.
BEST REGARDS.
hi every one,
please i need your help
what is the best configuration for the Demineralized water
2*100% mixed bed adsorber or cation exchanger, anion exchanger and degasser upstream the mixed bed adsorbers.
best regards
HI
I need your help
Can we direct an effluent that does not contain H2S only traces of NH3 with a large flow to the sour water system instead of HC close draIn to mix it with an acid flow that contains a significant quantity of H2S to be stripped.
SLTS.
HI,
could you please expalin :
what is the role of the two nitrogen purges and control of pressure .
what will be the impact on the vaccum system in case of failure of the the PCV 100 % open.
vaccum sytem is Multi-Stage Vacuum System with
A/2 rotary lobe blower
B/2 intercooller
C/ 1liquid...
the only solution that comes to mind to relate to this problem is to install a three-phase separator with two compartments inside and a residence time largely sufficient to separate HC and water by density difference. then the HCs will be routed to the slip network, the water to the cooling...
