Search results for query: *

Dears: In fact for design of a labyrinth seal in a water pump I search for the amount of gap (radial or axial) between rotary and stationary parts in an application with 1500 rpm and oil(SAE 30)sealing(bearing lubrication. can you help me? is this type of sealing useful?

Dear Mendit: In fact for design of a labyrinth seal in a water pump i search for the amount of gap (radial or axial) between rotary and stationary parts in an application with 1500 rpm and oil lubrication.

Hi All Dears: I would like to know some detalis about Labyrinth seals in water pumps.How much is the radial gap (between housing and seal)in this type of sealing?whether this type seals is prefered to contact seals for oil lubrication?

Hi All Dears: I would like to know some detalis about Labyrinth seals.How much is the radial gap (between housing and seal)in this type of sealing?whether this type seals is prefered to contact seals for oil lubrication?

I want to measure the internal radial(or axial)clearance in a practical way before and after mounting the bearing(taper roller or angular contact) on shaft.can you help me?

Daer jmoritz: i mean parctically in assembly.

For creating clearance between two taper roller bearing (face to face), Shall we use spacer ring bigger/smaller than distance between two outer rings of bearings? For example if we have 35mm distance between two outer rings, shall we use 35.05mm or 34.95mm spacer ring??

For creating clearance between two taper roller bearing (face to face), Shall we use spacer ring bigger/smaller than distance between two outer rings of bearings? For example if we have 35mm distance between two outer rings, shall we use 35.05mm or 34.95mm spacer ring??

I'm form Iran. I try to monitor the bearing temperatures on startup.if i get an aanswer i'll tell you.

Dear Hippo41, thanks for your help. you Can't believe that 6413 C3 are not available, but believe because I live in a conutry that cant find C3. Here in markets there are various kinds of bearings with different marks that may be many of those counterfeit and we can’t trust to those. I have...

We have a centrifugal water pump, 2900 rpm speed. The water temperature is 20-30 centigrade degree. In original design (KSB Germany) this pump has two 6413 C3 bearing with 0.023-0.043 mm radial clearance. Now we can't find C3 bearing. Can we use CN (0.008-.0.028 mm radial clearance) bearing by...

We have a centrifugal water pump, 2900 rpm speed. The water temperature is 20-30 centigrade degree. In original design (KSB Germany) this pump has two 6413 C3 bearing with 0.023-0.043 mm radial clearance. Now we can't find C3 bearing. Can we use CN (0.008-.0.028 mm radial clearance) bearing by...

We have a centrifugal water pump, 2900 rpm speed. The water temperature is 20-30 centigrade degree. In original design (KSB Germany) this pump has two 6413 C3 bearing with 0.023-0.043 mm radial clearance. Now we can't find C3 bearing. Can we use CN (0.008-.0.028 mm radial clearance) bearing by...

We have a high pressure pump MC200/4 wich have been bulit by Sulzer company. Now we have a problem with the reparing of its discharge side bearings wich are 2 taper roller bearing 31319(face to face). As you know a ring should be placed between them(sacer ring).The distance between outer rings...

We have a water pump(Sulzer)that the located bearing in this pump are pair taper roller bearing (31319) which mounted face to face. The floating bearing of this pump is a NU bearing. For repair this pump we need change the locating bearing. In simple way how we can calculate the length...

We have a water pump (Sulzer man.)that the located bearing in this pump are pair taper roller bearing (31319) which mounted face to face. The floating bearing of this pump is a NU bearing. For repair this pump we need change the locating bearing. In simple way how we can calculate the length...

i would like know the holding time of pressure. can you help me dear?

I would like know about time of hydrostatic test of water pump parts. Thanks

Please if possible one help me to learn shaft calculation pf water pumps, or if one has some references about this mater i wait for them. thanks

HI i want to learn design and calculation of balance pistons in multistage centrifugal pumps (water pupms). if any one can help me i'll happy more.