Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Multi-layer system: Stress-strain discrepency
Good day Yes, I am using Abaqus. I have uploaded an image of my model. I have also uploaded screenshots of contour plots of S11 and E11, as well as S11 where I adjusted the contour limits so that you can see the contours in the base layer. I am modelling a pavement structure. I modelled it as...- PhiaSmit
- Post #3
- Forum: Finite Element Analysis (FEA) engineering
-
Multi-layer system: Stress-strain discrepency
I have modelled a LE, three-layer system that consists of a 50 mm concrete layer (40 000 MPa), a 305 mm granular layer (207 MPa) and a 20 000 mm subgrade layer. The system is modelled as one part. A pressure of 550 kPa is applied to the system over a circular area. The z-axis is used as the...- PhiaSmit
- Thread
- Replies: 2
- Forum: Finite Element Analysis (FEA) engineering
