Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: BouzidLazhar
  • Order by date
  1. BouzidLazhar

    stainless steel cool down

    If the surface of the steel is free from pits and scratches and the welds are well dressed it is more than likely that steam containing up to, say, 50 ppm chloride could be used for cleaning without initiating SCC providing that the surface is rinsed thoroughly with low (<5 ppm) chloride water...
  2. BouzidLazhar

    Pipe Supports - Material Issue

    MalcolmA's suggestion is also a good approach as Zinc (for galvanized CS) or cadmium are considered as a sacrificial anodes.
  3. BouzidLazhar

    Max OD and Thikness of a seamless pipe.

    We've request two different pipelines: 1- 16" x 0.374" pipe acc. to API 5L X60 2- 20" Sch STD Pipes acc. to ASTM A 53 Gr.B The manufacture said that the wall thickness is TOO THIN for an execution as SEAMLESS Pipes. According to API5L, the min Wall thickness for: - Pipe 16" is 0.188"...
  4. BouzidLazhar

    Max OD and Thikness of a seamless pipe.

    Does the pipeline manufacturing process have a min wall thickness limit to produce a seamless pipe?
  5. BouzidLazhar

    Split Tees Design code

    How could we check then the split Tee's dimensions proposed by a supplier?
  6. BouzidLazhar

    Split Tees Design code

    Does ASME B16.9 Design code cover the Split Tees?
Back
Top