Hallo everybody,
i heard that man can the EMV analysis in RF-Toolbox von Mathworks. has anybody an experience with EMV anlysis for Brushless DC Motors in Matworks?
Thank you
Thank you for your Reply,
the Motor should be used in the automotive Area to drive water Pump. we are develloping the pump with a motor in Belgium. I measured the current of the motor in the Test bed not in the car and seems to be subjected to la oscilation with frequency around 2000 Hz. Is...
Hallo everybody,
I would like to have a standard Delta configuration of a 06 phase brushless motor. I mean how the Phases are commutated in a delta configuration. is that each time 03 phase are activated at every commutation?
Thank you for your help in advance
Yeah the things is that by using an electrical Network (not a battery) to drive the motor, we get a lower value of the power factor. It means the current has a significant oscillations ...
Hallo everybody,
i wanted to perform a EMC (Electromagnetic compatibility test) test for a brushless motor. do you any source of documentation or have anybody a expreience in this area ?
Thank you in advance
Hallo everybody,
i am measuring the current and voltage in a Brushless motor. the motor with its electronic is to a battery connected. I am measuring the current and voltage between the Battery and the motor. Since the Brushless motor with its electronic is a DC Device do i need to include the...
Hallo everybody and thank you for you answers,
I would like to highligh that the available pressure source is limited to 3 [bar]. and we don't want to reduce the oppening surface because of pressure Drop in the system (high flow speed).
For us the solution can also be Mechanical. has any Body...
Hallo everybody,
I need a help for searching a pneumatic valve which can fullfill the following requir.
1) Frequency 50 Hz to 200 Hz
2) Effective oppening area (170 mm²)
3) Pressue difference: 2 bar
The art of the valve is not important, it can be:
+ Solenoid
+ Piezoelecric
What is only...
I'm modeling a mech. excitaded structure with bonded piezoelectric actuators. The goal of this work is to provide a harmonic analysis firstly with the shorted electrodes and subsequently to damp single vibration modes with a shunted RL circuit. I modeled the circuit with CIRCU94 elements and the...
i build a large size model of a part of car (chassis) using Pro/engineer then i save it in *.igs form.
I tried to import the igs model using ANSYS.
i did' nt succed (memory size problem ...).
Can anybody Help me ...
Hi, i am working in automotive stuff, I wanted to know if anybody can tell me how to convert the ascii data file (x,y,z) coodrinates to 3 D Model, IGES, CATIA, ...