We came across this part and the QC inspector rejected the part for not comformance on the thread depth .40 XX = ±.020 the actual he gets is .359 from 11.5 revolutions. we are inspecting this part using the thread gage and count the revolutions until the gage bottoms out. we are not counting...
@ screwman, You are correct , I can't get this material released to the shop floor with out meeting the requirements of the print.
@jagad5, Im thinking the same. I dont think this material will pass the shear test, will wait until the results from the Lab come back.
@rb1957, this is a CSI...
The Drawing requirements are more important than a SAE-AMS spec. Drawing requirements are for only that specific part, a AMS spec is in general with that type of material. the raw material haven't yet sent to the supplier for machining. the Mill company only does the test according to the spec...
Document control people is getting my copy of AMS5732 tomorrow, until then I can read the spec, Im sending the material to get shear yield tested. If passes or fails I need to know asap, in order to get more and get the right material, the pin's are 2".5 long
Blueprint called out for material corrosion resistant steel A286 per AMS5732with a 95,000 PSI minimum shear strength. The material Cert shows only Yield strength: 121,000 PSI and Tensile strength: 161,000 PSI.
The mill company said AMS 5732 does not call for shear strength. I dont have the...
no , what I did, I sent a clarification request for that symbol with the PM of lockheed for this part. nobody knows what this symbol means where I work.
I have this plate identification part and on the print the dimensions look like this 76.2 `1 by 152.4 `6 the first dimension is on metric but the symbol ` and number 1 o `1 I cant seem to understand the meaning. does anyone know?
I have a material cert that certifies the material to ASTM B221/95, ASTM-B221/96, AMS-QQ-A-200/8/, AND QQ-A-200/8/F. I need this angle bar to be manufacture to ASTM B308. I know that for ASTM B308 the profiles are limited to I-beams, H-beams, channels, angles, tees and zees.
For ASTM B221 is...
