20" long radius elbow (thk.6.35mm) getting displacement of axial direction 46mm on operating case (Design Temperature). after putting loop on line
This 46mm is acceptable or not?
My question is not clear ,Sorry to all
Anyway i got answer.This answer for above question is
axial...
20" long radius elbow (thk.6.35mm) getting displacement of axial direction 46mm on operating case (Design Temperature). after putting loop on line
This 46mm is acceptable or not?
Thanks regards
dear all
Vertical can Type Pump (Can Dia.355mm & 2521mm Length)at very high seismic zone & Earthquake.
To protect this vertical pump from High Seismic zone & Earthquake.
we are planning to do below method's
(1) Appropriate support position by FEM analysic
(or)
(2) Metallic...
Dear RipZ
For dissimilar metal contact surfaces which may be a point of galvanic corrosion.
To avoid Galvanic corrosion pikotek gasket can use known (to isolate two dissimilar contact surface)
Thanks
LPG piping design temperature -45 deg c to 50 deg c and design pressure 40kg/cm2 g
And material for this line is A333-6 SEAMLESS
Valve vendor want to supply
Ball Valve Body material ASTM A351 Gr.CF8M can use instead of A 352 Gr.LCB
Ball Valve Body material ASTM A182 Gr.F316 can use instead of...
Thanks for All Reply..
And also i discussed with my process and machinery department,
suction line size 6" according to process requirement. and Suction nozzle size 6" according to pump vendor requirement.
So, Reducer is not required. hence both size are same (i.e reducer is not mandatory at...
VERTICAL LPG PUMP IS DESIGNED ACCORDING TO API 610 10TH EDITION
AS PER PUMP VENDOR DRAWING,
PUMP SUCTION NOZZLE SIZE 6", PUMP DISCHARGE NOZZLE SIZE 4"
AS PER P&ID
PUMP SUCTION LINE SIZE 6", PUMP DISCHARGE LINE SIZE 6"
IS POSSIBLE PIPING WORK CAN BE DONE WITHOUT REDUCER AT SUCTION NOZZLE ...
