i have a one-storey showroom building in australia approximately 6m height to be designed, the tilt up panel has thickness of 150mm and to be built on top of strip footing. i was just wondering what should be the approximate dimensions for my strip footing. i need this for my prreliminary...
i have a slab on ground on a showroom project to design in australia, the max load of the slab is probably less than 5kN/m UDL or 4 kN point load in its life time. the soil underneath has a modulus of subgrade reaction, k = 0.075 N/mm3. i was thinking to design it using TR 34 (but im not sure...
On a showroom construction project, after 300mm topsoil has been removed, a sandy soil site is about to be compacted for the construction of shallow foundation (strip footing). the sandy soil is asked to be compacted to required density. i was wondering what would be the value of the density? i...
To Mike, if I drop the footing down and run the slab over the footing, then that is no needed for the connection right?
To hokkie66, they are same, but I only show 1 side of it.
To Dik, can you talk deeply about 6" granular 'buffer',or maybe a picture of it to make me more understand.
thanks !
