Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. A

    Connector to casing assembly design

    The design is not finished yet; later the hole will be made to fit the connector. If we use a bulkhead fitting, does that mean the connector needs to be replaced with one that has threads?
  2. A

    Connector to casing assembly design

    Hello, I’m having an issue with designing the connection between the connector and the casing. The shape of the connector to be attached is shown in the first image. The mounting position of the connector on the casing can be seen in the second image, and the blue area must remain unobstructed...
  3. A

    Click mechanism on rotating plastic part

    - I think 1000 rotation - Just the weight of the component - Yes And all parts in the design are made using 3D resin printing
  4. A

    Click mechanism on rotating plastic part

    Is the spring and bullet mean is ball plunger like this? If all parts in the design are made using 3D resin printing, would it be reliable to use a zig-zag plastic feature for production? After studying, I found that using a click mechanism with resin material is prone to cracking. Is this...
  5. A

    Click mechanism on rotating plastic part

    Hello, I am a newly hired mechanical R&D staff. Currently, I am working on designing a component for a medical device, and I am encountering an issue with one of the parts. Below is the image of the sub-assembly component I am working on. The component can rotate from 0 to 90 degrees (The first...

Part and Inventory Search