I have to have two ends of Aluminium in the system and can only replace the middle part.
I guess many insulators materials would work for this application. Heat capacities may not be a worry.
The dimention are: 10 mm x 10 mm in crossection and 100 mm in length. Where 100 mm length consist of three sections 10+80+10 mm. The middle sections should be made of an insulator.
The temperatute in chamber of mostly 15 C°+/- 0.1C° but it can also be 20 C°+/- 0.1C° in very few cases.
Should...
The middle section can’t be replaced by anything to maintain the configuration of the original system and holding the rod inside the chamber. The relative temperature of the area inside the camber where 2 ends are present can very within 15 min time upto 15 mK.
Does a plastic insulator ensure...
a correction: ends are 10 mm each not 20 mm. A sketch is attached. http://files.engineering.com/getfile.aspx?folder=b779b090-f543-40a3-b1a0-22fc8fcda0b3&file=figure.png
Hallo,
I have an aluminium rod (crossection: 10mx10m and Length: 80 mm, heat capacity 0.9) placed inside a chamber of 100m3. The rod consists of three sections along its length (20mm sections on both ends and a 40mm section in the middle). All sections are of aluminium.
I want to find out the...
