Looks like I'm using preliminary and outdated revision of the document. I should buy a new one.
Thank you, kellnerp!
Now I have to setup my study properly...
1. How threaded connections are treated in COSMOS? For example, my frangible connection has threaded connection to flange? Should I...
Here are some sort of results I got with static study and Newtons applied. But when I've noticed that ICAO requires a bending moment in J, decided to ask Engineers.http://i51.tinypic.com/2rzq6wk.jpg
Thanks for your reply!
Yep, I'm not familiar with mechanical engineering. But I was also confused with units provided by specification.
Talking about specification, it's "Aerodrome Design Manual" Part 6 by ICAO.
Paragraph 4.9.2 says: <...>The yield point should be no more than 38 mm above the...
I have:
1. A flange with central hole. Anchored to virtual wall with foundation bolts.
2. A pipe inserted in the hole with one edge.
3. A loading applied to the other one.
According to specification, if a bending moment of 100J is reached, no damage should be made to the pipe, but if a bending...
The destruction is not electrical, it's themal.
When we talk about power electronics, there is also a electrical influence during arcing time. But in my case, arcing time is minimal.
But if you know proven way to simulate fuse, don't hesitate to shear with us.
Hello everybody!
I'm trying to simulate fuse for 180nm process using CFD software.
Fuse is a piece of Al wire created with top metal and passivation opening above.
I apply power dissipation to it and calculate time-temperature chart.
The problem is that I can't determine the point when my...
