Thank you everyone for your input!
Using the screw head is a good idea but I have a socket head cap screw. The flat is inside the socket.
Do you know of any adapter/extension that can join an Allen Key with a torque wrench?
Snug tight is another tricky questions, as everyone's snug tight is...
Hello,
I have an application that required a preload of 50% of the proof load on a M24 x 70 to 120 long. The bolt goes thru a clearance hole and threaded on to a tapped hole. The space restriction does not allow the use of a torque wrench. I planned to use the "turn of the nut/bolt" method...
We have just upgraded from NX1 to NX2. Apparently, all my toolbars are change. How can I bring all my toolbar settings and location from what I had in NX1 into NX2?
It should be in your start menu under Unigraphics NX--> Unigraphics Tools --> UG Open Grip.
From there on, it will take you to the DOS running the "GRADE" (GRipe advance developing environment)
You can then compile your code there.
BTW,I tried the code from the thread above and it works out...
Is there an easy way to quickly measure the stock size of a solid model in unigraphics?
For example, I want to machine a part to my solid model, and I'll need to identify the minimum block size to use in my bill of material. Other than measuring the distance in the x-y-z direction manually...
