What are you looking for exactly? Are you trying to track weld stamps, heat numbers, RT reports, etc for new fabrication? Are you looking for in-service software to determine corrosion rates, prediction of expiry dates and storage/interfacing with dataloggers for UT thickness data?
I do not have access to API RP2003 and am wondering if anyone knows if it is acceptable to have vessels housed inside a building grounded through the building's skid. Two corners of the building have ground cables and each vessel is either welded or bolted to the skid. Any info appreciated.
Hi,
Looking for help in regards to a design question. I have a caustic tank with a vertical overflow internal pipe that connects to a siphon breaker through the roof, then u-bends down to a nozzle attached approx. 2' above floor. There is an engineered sump for retention, and the nozzle...
I have seen lots of these on Natco (National Tank Company back then) vessels like test separators and glycol contactors that were built in the late 40's to mid 50's. Believe they were all from Tulsa, but maybe a call to Natco in Calgary or Tulsa could confirm their meaning.
Regards...
2235 is the code case for TOFD for Pressure Vessels only. Also must be sure thcikness is greater than .500". Keep in mind that TOFD has "Blind Zones" at both the ID and OD, and as such, must be combined with shear wave probes, two aimed at the root, two at the cap, usually 45 and 60 deg...
Hi all,
I am looking to replace an older corrosion survey program with something more current. I need to be able to generate Code calculated T-mins, and have some sort of interface with Olympus or Krautkramer data loggers. I am familiar with UltraPIPE, PCMS, and Visions, but these three are...
