Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. dhrupal93

    Ansys Optimization Using Parameters

    I found the solution Custom Parameters solve this issue. https://www.sharcnet.ca/Software/Fluent14/help/wb2_help/wb2h_parameters.html
  2. dhrupal93

    Ansys Optimization Using Parameters

    I have a cantilever beam, which is fixed at one end. I want to apply two moments at two different points and measure the end deflection. So, for optimization, I have 3 parameters, namely, moment1 (M1), moment2 (M2), and tip deflection (X). I want to "seek target" the tip deflection by say x...
  3. dhrupal93

    Ansys Moment determination with Displacement Boundary Condition

    1) Yes, I am constraining Center pickups. What set of forces and moments I will have to aaply need to be determined to get displacement of A SINGLE node on rim (not entire rim). 2) 16 random loads (will be bounded by maximum loads at those points). Surely their are more no of inputs than...
  4. dhrupal93

    Ansys Moment determination with Displacement Boundary Condition

    To rb1957 I want to bend the structure. The method you are telling is correctly applicable till one (or few) actuation points. But in the Antenna, their are 16 such points (in the lower part of image, see that I have mentioned M1, M2 ..... M16 all may be different). Hence, response due to all is...
  5. dhrupal93

    Ansys Moment determination with Displacement Boundary Condition

    I have a parabolic 3D structure (an Antenna) which is mounted rigidly near the center by 8*2 = 16 bolts. I want to deform the structure. So, I have a known deformations at a particular line of CAD model/node (eg say at any edge node along z axis by 1 mm ) (displacement boundary condition). For...
  6. dhrupal93

    What is Hourglass in FEA

    I am new to this field and what to know about Hourglass

Part and Inventory Search