My CAN cable is not shielded, it's a twisted pair. This Bus is designed to work in harsh environments such as truck frame.
Do you know how this termination is made in OEM CAN networks?
Thanks again.
JB
Hello all,
I'm looking for a standard automotive CAN Bus termination resistor to implement in a wire harness. I know that a 120 Ohms resistor is needed at each end of the bus to isolate it from noise. I have 3 nodes on the bus and only one is terminated. Since this goes for several units...
Hello all,
I'm looking for a standard automotive CAN Bus termination resistor to implement in a wire harness. I know that a 120 Ohms resistor is needed at each end of the bus to isolate it from noise. I have 3 nodes on the bus and only one is terminated. Since this goes for several units...
Hello,
I'm working on a small electronic device to be used on automotive/heavy-duty conditions (engine bay temperatures)
The device is composed of : connector, cable, PCB, potting and plastic box (rectangular app. 600x400x300mm)
I need some help to find a supplier able to produce such kind of...
Hello,
I'm currently working on the development of a Dosing pump (stepper motor and membrane).
My question is: what is the impact on the performance if I use a inner Ø8mm instead of Ø6mm on the suction and on the return line (line returning to the tank for priming)?
I think the priming will be...
Hello,
I'm looking for NOx sensors for automotive Selective Catalystic Reduction applications.
A sensor based on the size of a lambda sensor would be suitable. I know that Siemens is delivering this kind of product but does somebody know other product and alternative supplier?
Thank you for...
Hello,
I'm currently looking for a non-return valve to be used as a security on a truck air line.
Air line specs:
inner Ø4mm, max air pressure = 12bars, max flow = 30l/min.
The valve must allow any air flow and retain any back flow.
This back flow may contain urea (Adblue).
I've followed the...
