the two plates have slots and are connected by a bolt. so the degress of freedom are constrained. But this modell is just a simple test for a more complicated model, where multiple planks are connected via that long slots and bolts and that grid setup is then deployed to open up. I want to...
Hello everybody,
I have two plates resting on each other and at some point the upper one slides along the touching surface of the lower plate. I want to define a constraint that forbids a certain point on the upper plate to leave a certain area on the lower plate. i cant use the connector slide...
Dear forum users,
My model as you can see in the attachment file consists of 2 planks, each with a long slot along the length. The two planks are held together by a bolt which can slide along each of the long slot. I want to simulate that connection by connecting a reference point (CP1)...
Greetings,
My model as seen in the attached file shows two plate which lay on top of each other. the lower one is encastred and the second is supposed to move 10 units in X direction and 10 units in Z direction while rotating 40 degrees. Which is not a problem at all. I want to apply a...
