Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Concepts12

    Instrumentation Problems

    Thanks guys for all the help. The suggestions you all made were very helpful but when applied to the data at hand didn't work. The thing is that we have data with readings that would suggest a ruptured pipeline occurred. Therefore any of these suggestions we implement would reduce the number of...
  2. Concepts12

    Instrumentation Problems

    Thanks for the help guys, I included your suggestions but encountered the following problems. We have decided to include the interlock and applied the following conditions: Valve Open, Pump running, Pressure below a certain value and Flow Rate above a certain value - Low Low Trip occurs since...
  3. Concepts12

    Instrumentation Problems

    We have a system in which the High High and Low Low pressure alarms on a pipeline were disabled. The process is such that when the level in a tank upstream of the pocess goes low, the valve closes and the pressure in the downstream line decreases. This causes the Low Low pressure alarm to trip...
  4. Concepts12

    Problems With Waste Heat Reboiler

    The piece of equipment is actually a heat exchanger to be correct. Thanks sshep and JLSeagull.
  5. Concepts12

    Problems With Waste Heat Reboiler

    We have two Waste Heat reboilers in parallel in which the effluent gas from the turbines are used to heat up the TEG and water mixture in the ratio 75:25 respectively. The readings obtained showed that the flow rate of the TEG mixture out of the Reboiler is greater that the flow rate into the...

Part and Inventory Search