Dear all,
what does the inlet and outlet "cooling water" temperature of an absorption chiller refer to?
is it the return of water back to the storage tank at the bottom or something else?
thanks
thanks for your reply "willard3"
i have the insolation values
and i'm assuming that the generator inlet temp will be the outlet temp of the fluid from the collector
my question is what will be the inlet temp to the solar collector? is it the case that the outlet temp of the generator is the...
i need to find the instantaneous efficiency of the flat-plate collector using hottel-whillier-bliss equation, when the collector is connected to an single-effect absorption chiller (70kw cooling capacity)
i am confused with what will the inlet and outlet temperatures of the collector be?
thanks
i have found a cooling load of 70kW
selected Yazaki absorption chiller of 20ton (approx. 70kW)
i plan to couple the chiller with flat plate collectors, therefore making a solar assisted absorption cooling system
i need help with sizing the flat-plate collector area
thank you
Can someone please give me guidelines on how to design a solar based absoprtion cooling system
the first and foremost step towards this process is the calculation of the cooling loads, which I have already found out
but what are the next steps?
Thanks
Thanks for your reply Drazen
the thing is I plan to make se of LiBr-water absorption chiller which if not completely, partially be powered by solar energy
I have read through quite a few journals written on Solar assisted absorption cooling but none of them specify the formulas (hand...
thanks for the reply 317069 and willard3
I have found a few LiBr-water absorption chillers by Yazaki and Trane
My next doubt is regarding the calculation of the solar collector area
for a fact I may use TRNSYS to find out the collector area but im looking for hand calculations
For designing a conventional electrical air conditioning system for a given space, the cooling load has to be estimated (internal gains + external gains)
I have found the cooling load, and I plan on using absorption chillers which would use hot water to operate. The hot water would be obtained...
