Thanks to all for the input. At this point, based on the feedback from this forum and budgetary requirements, it looks like a double diaphragm air pump with a 3" inlet that is set to run about 50 cycles per minute is the most appropriate choice. 25 feet of hose in and 25 feet of hose out. Based...
Sounds like I'll have to look into Rheology. I had no idea pumping a little fluid would be as technical as this. (Playing with solids historically, can lead to those kinds of assumptions)
Thanks for the info FACS.
Thanks very much to all that responded. Your information has provided a much clearer picture of what this system is supposed to look like. You've also given me a little knowledge. For that, I'm grateful.
This operation would happen every 90 days. We would clean out after each use. I'll check into the progressing cavity pump as I'm not familiar with that type. Thanks!!!!
Thanks a bunch for the help!!! I hope the information below clarifies the application a little further.
The delivery is 4500 gallons and needs to be unloaded in 2-4 hours. Flow rate is estimated at 19 - 30 gallons per minute.
The tank has a tapered botton so gravity feed will work fine for...
I have no experience sizing and configuring pump systems.
This lies way outside of my area of expertise.
I'm hoping members of this forum can provide some guidance and clarity.
The plan is to install a 5000 gallon vertical tank to store natural rubber latex. The latex will be delivered via bulk...
