I managed to make the partition in abaqus...that is ok, but now i'm having trouble with the results caused by this load on the sector. I'm getting this error
Error in job Job-1: Too many attempts made for this increment
i have already increased the maximum number of increments, decreased the...
I've tried what you said but i was not sucessfull. I don't think though that i'm explained right. I need to make a "sector" in the rim to apply forces in the zone that the wheel touch the ground. In the partitions menu the options are more oriented to faces, so i can't do anything with my...
everything solved. Tell me one last thing. I don't know exactly how to explain it but..how can i apply a force to a restricted area of the rim? for instance, i wanna apply a side force on 20º of the rim. How can i do that?
Done. I managed how to fix the problem. It was the mesh, now it's ok. Just give me a tip..how can i change the "efects" of deformation, to not see it so exagerated?
I changed the values of thickness, so now all vallues are in millimeters. Changed the elements in the mesh, so now the mesh in the rim area is much more fine than previuosly as you can see in the picture..but still the same problem persists.
http://alojaimagens.com/images/zbph5kdrg40fradha8.jpg...
ohh ok. I know that abaqus is limitless. I put wall thickness 0.00018 m because that is the value of a layer of carbon fiber. So the wall thickness it's suposed to be the value that i expected from the sum of all layers of carbon fiber. I will fix that.
And i will try to do local mesh on the...
i mean..the rotation of the wheel is caused by those 4 wholes. In those 4 holes will be a screw that transmits the power from the hub to the wheel, so i made it encastre. you can see the real wheel in the picture but with 6 screws instead
http://alojaimagens.com/images/ho0xjv9s8klavyu4qcu.jpg...
No, i'm not trying to rush, but i'm trying to make this work since a few weeks ago and still can't figured why is not working.
In the pictures you can see, i applied a pressure to the internal part of the rim
http://alojaimagens.com/images/toi4xbzohkfdjlr4l7.jpg
then i made the BC's, a...
I made the wheel on SolidWorks and then imported to Abaqus by *.igs, so i don't think that i have a problem with multiple componentes because in abaqus it's only a part..but that it's just me thinkin, what do you guys think?
No, i'm not applying tie constrain between them.
And the values for...
The problem its not the scale nor the units. The problem is that the rim doesn't deform...expands. And i need to know the values of deformation and tensions on the rim, witch i can't because the rim doesn't deform.
What am i doing wrong?
Thanks for the reply
Hi, i'm new to abaqus and i am trying to make some tests in a wheel. The wheel is made only by carbon fiber.
I think that i made everything right, choosing the material, the composite layups for the rim and for the wheel walls, the load. However i'm not so sure about the BC's that i choose...
