We are contemplating using mating connectors plated with Cadmium (aluminium shells) in one connector and Zinc Cobalt plating on the other connector.This is a naval application in salt spray atmosphere. I don't have enough experience to be sure about the corrosive effects of these dissimilar...
Thanks for help so far. Here is the Circuit Diag
http://i1.tinypic.com/rmnss0.jpg
Bsides being interested in fixing the generator I am keen to understand the theory. I have some electrical understanding so you don't need to start from scratch. The features that are puzzling me are:-
We have an...
Thanks Gents. I have done a couple of things today. Firstly by cutting the speed right back I can get 260VAC and frequency around 45Hz both measured using a Digital Multimeter. It's a bit difficult to back off the speed accurately because the governor lever/spring is holding the throttle open...
I am trying to repair a Honda 650W petrol generator. after replacing the 8uF capacitor which terminates the 'condensor' winding with a similar but 10uF capacitor I got electrical output. however it is about 700VAC instead of the rated 240VAC. I am guessing that the capacitor value is not that...
