Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. tmckeown

    Help with hoist application needed

    Thanks Lionel, We're talking with ABB now. Maybe they will have some ideas how we can better tune it. We've spent a few weeks with it and haven't solved it.
  2. tmckeown

    Help with hoist application needed

    Gunnar, Thanks for the recommendation of the OptiDrive Plus 3G. We picked one up. We also bought an encoder module for the ABB ACS350 drive we are currently using. Wow! So far, there is absolutely no comparison in performance. The ODP can start from a dead stop and hold the hoist there at our...
  3. tmckeown

    Help with hoist application needed

    niallnz, I had thought about that, but the Z channel is only once per revolution. I need a minimum of 60 for positioning. Good idea though. I'm also ordering a 1024PPR encoder for the motor. We think we have figured out a way to add it to the back end of the motor. It will take some work, but...
  4. tmckeown

    Help with hoist application needed

    I wish I were in the UK. Unfortunately, I'm strapped to my office chair in Chicago. I spoke with a couple different guys at Bardac today. One said it probably wouldn't cure the problems and the other said it would. Since time is short, I'm giving it a shot. Before the end of the week I'll know...
  5. tmckeown

    Help with hoist application needed

    Gunnar, I ordered an Invertek Optidrive Plus 3gv today. I should see it tomorrow and be able to check it in our application hopefully on Thursday. This would easily be the least painful modification to the existing hoists, "if" it works. I'm still actively looking at other options in case their...
  6. tmckeown

    Help with hoist application needed

    niallnz, Thanks for that info. We do have the encoder input module for the ACS350 drive. Unfortunately, the Brother gearmotor has no place to add the encoder. Our drum encoder for positioning is only 60PPR. I'm not sure the drive will be able to do much with that limited information. The motor...
  7. tmckeown

    Help with hoist application needed

    Gunnar, I did look at the Optidrive Plus 3gv. It looks like it may work for us. I've got an email into them to find out pricing and availability. I need 66 of these in a hurry, but just one to make sure it will solve the problem.
  8. tmckeown

    Help with hoist application needed

    Kieth, I checked further into the ABB ACS800 drive with DTC (Direct Torque Control). It's supposed to hold a load at zero speed without an encoder. The price is 3X the price we paid for the ACS350 we currently use. I got a quote of around $1200, as opposed to the less than $300 for the ACS350...
  9. tmckeown

    Help with hoist application needed

    Gunnar; I'll check out that drive. maybe we just need a different one. I'll also call ABB again, since they helped spec the 350 series. Lionel; From all my reading we "should" be able to get it to hold at zero speed, though so far we have not been able to do that. I think having an encoder on...
  10. tmckeown

    Help with hoist application needed

    Thanks for the replies, Keith, Do you have any recommendations on motor manufacturers? We went with the Brother because it was light and small, which were pretty critical to our design. Unfortunately, they don't have an encoder option. There are some third party add-ons from Dart, but the...
  11. tmckeown

    Help with hoist application needed

    Hi, First time posting here. This is a great forum. I've learned a lot from just reading it all day. I've been assigned to make a cable hoist for our company. I finished the first batch of them and they turned out pretty well, but I'm having a few problems that I could use some expertise on...

Part and Inventory Search

Back
Top