5125er at 95% dry density the load bearing capacity of the ground is pretty high.
In my xperience, installing screw piles into engineered fill is more difficult then into natural material because it's been compacted so much.
if it's shale at 95% youre talking about, it'll be so hard you;ll get...
this is a great thread
I havent heard of anyone in Australia galvanising screw piles but I sure would like to learn more about how they behave/ costs associated with. Most of the time corrosion isnt a major issue for us here, but sometimes it is the predominant requirement and needs to be dealt...
For corrosion, the galvanised and stainless steel options you listed would be rather expensive (rare manufacturing too).
Our screw piles are not corrosion proofed, the reason being:
1. The mild steel tube has a thin coating on it from the steel manufacturer (not much but it's something).
2...
Large column loads can be dealt with by installing multiple screw piles under a pile cap - simple.
Seating the screw piles into rock is not new. The pile will not 'spin' just short of the bedrock because it is the helix that advances the pile, not the tip. Besides, there's a higher pressure...
Finally, a subject that falls within my range of experience! lol, check below...
Helical (screw) piles are always proprietary products from different companies, ie there is no standard screw pile design spec but many companies make their own. I work for a screw piling company here in Australia...
Hello everyone,
I'm working on a design and need some pointers on either some literature or people's experiences with concrete adhesion to steel (not ribbed reinforcement).
The design calls for steel screw piles (steel circular hollow section) to be installed under a conc floor. The piles need...
my dolution would be to alert the client that the competitors design be checked by a third party (peer review), also notify the client that under designing can void their building insurance... that should make them see the light.
good point bigH
I have never been exposed to different log particle size scales because here in Australia, we always use the USCS particle sizes (each chart displays the full spectrum) - thats what makes it easier to compare 'em
but it's useful to be aware that a difference can exist and to be...
wasjay
well graded means (in figurative terms) that the curve on the particle size distribution graph is smooth and concave (think of it as a pizza with the lot - there's a bit of everything on it)
the flatter the curve - the broader the spectrum of particle sizes, the steeper the curve...