Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
EN 12874 vs IMO Circular MSC/Circ 667
Hi guys, I am going to use a flame arrestor on external turret mooring system for FPSO. My Notified Body said the design shall be based on IMO Circular MSC/Circ 667, however my vendor use EN 12874, which is the vendor said more stingent than IMO. Can you give some advices? Thanks before.- mhuvalve
- Thread
- Replies: 1
- Forum: Pipelines, Piping and Fluid Mechanics engineering
-
Carbon Steel, Impact Test
Colleagues, CS materials like ASTM A106-B, ASTM A105, A234 WPB, A672 CC60/70, ASTM A516 Gr 60/70 or ASTM A216 WCB, based ASME B31.3, Table A-1, have a lower temperature limit -29 deg C, the requirement of impact test for application under -29 deg C will be based on para 323.2.2. Do you have...- mhuvalve
- Thread
- Replies: 4
- Forum: Metal and Metallurgy engineering
-
Bureau Veritas Certification
Hi guys, My project will be certified by Bureau Veritas, therefore all related piping material will be tested based on NR 445 and NR 216. However most of manufacturer refer to International Standards for their products and will certify their product based on EN 10204 Type 3.1 as a minimum...- mhuvalve
- Thread
- Replies: 3
- Forum: Pipelines, Piping and Fluid Mechanics engineering
