Search results for query: *

analogkid2digitalman Thanks for your response. These items are not connected together. Not for sure if it is an encoder, resolver or a tach gen. Thats why I started searching for some info. I do need a diagram for the digital display., I have no other info other than what i have listed...

It has been my experience working with Allen Bradley Plc units a USB to 9 pin rs232 converter/gender changer will not work. It will work with Modicon type PLC units. I have tried numerous ways with no success. Your best alternative would be to purchase a laptop with a serial port. RLGAuto.

Can some one point me in the right direction to find information on the Digitec 8310x digital readout and a KCI encoder type NM701NR1, I believe this encoder was manufactured for Kone cranes. I need wiring prints for these two items. Thanks in advance. RLGAuto

Can anyone point me in the right direction to find information on the Electra Faurndau variable speed motor? This motor has a servo type motor mounted on the top side that adjusts the brush position to obtain the variable speeds. This motor type is: DNR 2/10d, speed range of 625 to 2500 rpm...

Hello, Can anyone help me in locating a version of win+drive software for a GE drive? I believe any version would work, I was told that version 1 would be a good start. This software was around in the early 90's and operates with win95 or possibly Win NT. Robert RLGAuto

marcosheila, You will be receiving an E-mail shortly. No, unfortunately your company is not the only ones losing IGBT modules. RLGAuto.

marcosheila , What have you tested on the output side of the drive unit? A bad motor, possibly bad conductors or simply a loose connection could cause this. How long has this been going on? The first time that it happened did you find anything? If so, after replacing the IGBT module, did...

Tom, Thank you for your reply. You are correct in everything you said. But, We had a DGFC card fail, which is no big issue. We replaced the card. You can access the DGFC using a DOS based program called HIBS. We can also do a save parameters on the new card by using the "W" command and then...

Does anyone have any knowledge on the DGFC 6KCV300DGF card that was installed on some AV300 GE drive systems? This is a digital general function card. Thanks.

Daxer I may be wrong here, but isn't APT dos based? I had the same problem with running HIBS, Bricks (GE drive software). I use my newer laptop with XP OS for Proworx NXT and purchased a second laptop with a 9 pin serial with an OS of windows ME. This allowed a lot of flexability with the...

maxbreizh (Industrial) If you didn't want to purchse software right away you could collect valuable data to evaluate the process by monitoring the logic of the machine. this would provide you with exact times run, buttons pushed, change over times, up & down times plus any other combination...