Hi, guys
Is there any way that I can cnc tap with chip break? I can not find any choice of operations in UG nx8.0 but UG nx8 post builder has chip break tap.
how can I connect operations and ug post-processor
thank you
dave
Hi, guys
Is there any way that I can cnc tap with chip break? I can not find any choice of operations in UG nx8.0 but UG nx8 post builder has chip break tap.
how I can add this extra into operation list? I am talking about heidenhain control.
thank you
Hi shags72,
I have posted them seperately, each result are totally ok but not linked post, from my understanding linked-post not even goes through in the very beginning.
my programs are ordered by lathe => z-milling => x-milling, the programs for lathe would not go through the main post z-head...
Hi shags72,
1) I made mill-turn-zhead as the main post and linked to lathe and mill-turn-xhead, and named them zhead\turn\xhead
2) I also defined "user defined events" head event by machining method ==> object ==> start event ==>active head zhead\turn\xhead
give me following message right way...
Hi shags72,
Thank you so much for your answering.
I have checked all the TCL files, found out that all the variable of mom_sys_add_cutting_time are defined at
the beginning of procs, one is in proc MOM_end_of_path { } {, other one is in proc MOM_start_path { } {.
I don't know what is the...
Hi joycejo,
first thank you very much.
at beginning I thought same thing, and I even looked rest of tcl calculation and found same expression,
I even tried
set a 5
set b 6
expr $a + $b
11
anyway the following is proc:
#=============================================================
proc...
Hi post experts,
I had an issue when I was trying to link mill-turn posts together with nx8.0
I made 3 mill-turn posts turning & zhead & xhead, I tested them seperately all ok.
1) I made mill-turn-zhead as the main post and used linked feature connected turning and mill-turn-xhead, and named...
Hi Guys,
I had a issue of ipr output.
when I tried to output tapping cycle on mill, I need set feed-rate = 1/pitch, change the feed-rate mode to IPR,
but after posting I can get right if feed_rate >= 0.1 (most time < 0.1 for inperial), when feed_rate <= 0.1 0.1 would be the only
answer, I...
I was trying to make DMG Millturn with XYZC UG Post, I have did
1) 3-Axis mill-turn(xzc)
2) Initial axies Z
3) click Cartesian as Default Coordinate Mode and Circular Record Mode
post result get -x coordination, Millturn is not suppose to have "-" X coordinate, how can get rid of this ?
or...
About feedrate in millturn milling:
I have tried to change default F to mom_feed_rate_per_rev in post-processor, and program from ipm to ipr, because it is normal to use inches per-rev as lathe feed, but the numbers are not what I wrote in the program.
I know there are some kind of...
I need put [ ] into my postprocessor as notes or a tool list, and I have tried using "new block" and customer commands, I can get (........), but DMG lathe only can reads [........] and customer commands would not let me to use [ ] as text.
guys I need these, and thank you
I was trying to make a xzc mill-turn UG post,and I found one in default folder called "mill-turn side spindle", and it works well but need some minor changes, in order to keep the original I did "save as", but the new post's result changed totally, and I did not change anything. I have tried...
I am going to talk a DMG application guy see if I can get help.
I have tried only running cycle 7 without cancellation, from machine readout the part origin really changed, so I am guessing "Some evo's do not transform the cs properly " is right.
I have tried make a new custom-command TCL file...
Hi guys,
I had a problem when I made my own UG nx7.5 post of DMU eVo linear (5 axis with B & C) with heidenhain control, the result is ok if no rotation involved, but when I have spatial rotation, the cycle 7.0 values keep same but I tried it on CNC turns out not right,some people say that we...
After tryout on our CNC, I found out that if you got circular motion involved under M128, you can only work on XY YZ XZ major planes, and the coordinates gotta be XY YZ XZ in C and CC accordingly, L is ok with X Y Z because it moves from point to point anyway. Becareful, I had DR+ and DR- ( arc...
I have tried that it did not work for CC C circular move in X Y Z, and no detailed message for that.
people suggest me that forget M128. I don't want to do that, must be someone out there knows how to fix that, first of all thank you here.
1) call tool Z, here "Z" is for vertical CNC from my...