Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. jmack5

    Need hpgl data pulled into UG NX3 drafting

    Howdy- My office is using Mentor DX Designer (Circuit card / schematic design) and UG NX3. Don't ask why, but I need to be able to pull in schematic data from DX Designer and put it into a UG NX3 drawing (drafting). Mentor only allows me to export to hpgl; not dxf or cgm. I've thought about...
  2. jmack5

    IEEE Standard for Connector designation in Schematics?

    OK, I'm a bit confused. Which one should I follow then? IEEE Std 200-1975 or IEEE Std 315-1975? Please explain to someone new with drawing standards...
  3. jmack5

    IEEE Standard for Connector designation in Schematics?

    OK, I found the standard. ANSI Y32.16-1975 IEEE Std 200-1975 page 11 Quote: 4.1.5.3 Connectors. Connector reference designations shall be assigned in accordance with the following principles: (1) The movable (less fixed) connector of a mating pair shall be designated P....... (2) The...
  4. jmack5

    IEEE Standard for Connector designation in Schematics?

    First off, thanks for any help. We have an issue in my office as to what is IEEE-standard for Connector designation in a schematic. This has to do with 'P' vs 'J'. Can anyone point me to an IEEE standard that proves out one of these two? CAMP ONE Standard for P and J designations is that P...
  5. jmack5

    Cannot read Wildfire parts in Algor V16

    Hello. First time here. I work at a small engineering firm which has recently gone from 2001 to Wildfire version of Pro-E. For whatever reason, we cannot pull in Wildfire parts to do FEA on. Any ideas what the problem might be?
Back
Top