Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. AIRFRAMER

    ***Flight Control Problems***Urgent******

    We have a rudder vibration that is felt throughout the full movement of actuation. We troubleshot it down to (or what we think is the rudder control output shaft on the rudder boost package.) The non adjustable linkage from the boost package to the rudder bell crank. There is obvious wear on...
  2. AIRFRAMER

    Aircraft Rudder Chattering

    Hello Everyone I am currently deployed and i work on the P3C Orion Plane, my question is for the Rudder Hydraulics System, with hydraulics on and you move the rudder pedals to the left & then to the right the rudder pedals will start to chatter like vibration, and if you go into the access area...
  3. AIRFRAMER

    Buffalo Tumbler, Gear Ratio Reducer

    Hello, I built a Tumbler for Large Hides, Buffalo, Elk etc. The tumbler is like a dryer, it is 6'long, 6'wide, making the circumference 18'. It is made with 2*4's & 3/4" plywood on the sides, I have it on a Metal Frame with Pillow Block Bearings on the sides for rotating, I am trying to use a...
  4. AIRFRAMER

    Gear Ratio for buffalo tumbler.

    Hello, I built a Tumbler for Large Hides, Buffalo, Elk etc. The tumbler is like a dryer, it is 6'long, 6'wide, making the circumference 18'. It is made with 2*4's & 3/4" plywood on the sides, I have it on a Metal Frame with Pillow Block Bearings on the sides for rotating, I am trying to use a...
  5. AIRFRAMER

    NAS628-74 OR MS21250-08-74

    I AM LOOKING FOR THESE BOLTS I HAVE TRIED EVERY WHERE, AND I HAVE NOT FOUND ANY, I DID HOW EVER FIND A COMPANY, BUT THEN THEY SAID WE DO NOT HAVE ANY, AND IS THERE ANT OTHER PART NUMBER OUT THERE THAT IS THE SAME MATERIAL AND SHEAR STRENGTH, THIS A/C HAS BEEN DOWN FOR 38 DAYS NOW, AND I JUST...
  6. AIRFRAMER

    ADDING THREADS TO BOLT

    HEY THANK YOU GUYS FOR THE INFO, BUT I STILL CAN'T FIND THESE DARN BOLTS, AND ARE THE NAS628-74, AND THE MS21250-08-074 THE SAME BOLT, I HAVE LOOKED ALL OVER, AND THIS A/C HAS BEEN DOWN NOW 38 DAYS, STILL NO BOLTS, OUR SUPPLY LOOKED ALSO AND THEY FOUND A COMPANY BUT NOW THEY SEEM NOT TO HAVE...
  7. AIRFRAMER

    ADDING THREADS TO BOLT

    I HAVE 8 BOLTS FOR A MAIN LANDING FULCRUM THAT ARE TO LONG IN GRIP LENGTH, THE PN# IS MS21250-08-76 AND I NEED A MS21250-08-74, I HAVE LOOKED WORLD WIDE AND NOTHING CAME UP, THE ONLY ONE CAME UP WAS THE -76 AND I ALOSE INSTALLED SHIMS AND THE MAX WASHERS STILL THE NUT BOTTOMS OUT, WILL THERE BE...
Back
Top