Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: 40410
  • Order by date
  1. 40410

    Choke valve datasheet

    I have to specify the process data for the choke valve. The well is having the following conditions 2000 BPD oil with 0% water cut 4000 BPD oil with 50% water cut In this case, oil is flowing from 3 wells which is combined in a local manifold near the 3 wells and one line is run to the...
  2. 40410

    Choke valve datasheet

    I have to specify the process data for the choke valve. The well is having the following conditions 2000 BPD oil with 0% water cut 4000 BPD oil with 50% water cut In this case, oil is flowing from 3 wells which is combined in a local manifold near the 3 wells and one line is run to the...
  3. 40410

    Well testing

    Fairclough You are suggesting to avoid coriolis flowmeter when the water cut is high and gas/ oil is not separated what is the water cut above which it is categorized as high Once a separator is installed to separate the oil/water and gas the coriolis flowmeter should not be a problem. in...
  4. 40410

    two phase pressure drop

    I have to perform the two phase pressure drop for the oil flowing from the wellhead to the inlet manifold at the station via the choke valve and manifold. known data are flow rate, wellhead flowline presssure and temperature and water cut. Seeking help to the do the above
  5. 40410

    TWO PHASE PRESSURE DROP

    I have to perform the two phase pressure drop for the oil flowing from the wellhead to the inlet manifold at the station via the choke valve and manifold. known data are flow rate, wellhead flowline presssure and temperature and water cut. Seeking help to the do the above
Back
Top