Dear Selvarani,
To answer your questions
1.0 When the liquid flows through the mass flow meter tubes,there is a twist in the tubes due to Coriolis forces which are generated in the tube .In case there is lot of vibrations in the line you can go for remote mounting of meter .When I say...
Hi Murphy,
You can definately use radioactive level measurement for continuos level measurement .You can use CS-137 source and detector .Since the height is 10 M ,you may have to use 2 sources since there is beam angle limiation .
The vendors indicated by you are very renowned in this field...
You have to go through the manufacturers installation manual for finding the straight length requirements .For certain flow devices like orifice plates,venturi,flow nozzle you have to refer Std ISO 5167.
Hi MVD,
Mass flow meters technology has improved considerably and as long as you do the proper supporting there should not be any problem .Further it is advisable to have a vent valve at the downstream side so that if there is any water hammer effects then it can be taken care .
The mass flow...