A vendor is using a continuous gas furnace for 316L stainless steel pipe solution annealing. The rolling speed is set to allow 6 minutes per mm (e.g. for 16 mm thick, the travel time is 96 minutes) including heating and soaking period in the continuous furnace. This is followed top/bottom by...
Hello,
Anyone familiar with stainless steel pipe continuous solution annealing by induction heating. I am reviewing a 316L SS pipe specification. The induction heating zone length is about 600 mm and the pipe forward speed is about 400 mm/min. The temperature was monitored by two pyrometers...
Thank you SJones for your feedback.
When it comes to new project design and material selection, the designer is liable to provide the necessary material performance guarantees. Unfortunately, conference papers may not always be based on reliable testing conditions or test may not...
I am researching about the stainless steel limits in produced oil and water environments. I found a little in the literature about stainless steel corrosion and limits in oxygen free environment (pitting and crevice corrosion). Most of the limits I found in the literature including, SCC...
Greetings All,
This is my first participation in this great forum.
I am interested in corrosion modeling for oil and gas pipelines and I’ve been reading almost every publication related to this subject including INTETECH’s, M-506, FREECORP’s, De Waard-Milliams-Lotz, … etc. I am a user of ECE...
