Hi Guys,
Sorry could not get a photo permit from the site manager, but here are some more details;
The foundation is octagonal
the size is 5m by 5m
the height is 1.75 m , 1m below ground and 0.75 above ground
reinforcement; 25mm mesh four layers - top, - bottom - upper intermediate,- lower...
I have a foundation with an Octagonal pedestal, the diameter of the pedestal is about 3meters and rises above the ground level by about 1.5 meter.
the pedestal carries a process vessel which sits on a steel ring.
during commissioning and the vessel was filled we have noticed cracks at each...
I hear what you are saying, it is true you need data, what I was looking for is if any one has a worked example, at least i could then follow the steps.
most of the time the scenario is that we have a 10 inch GRP pipe burried about 6 ft in sand, and a concrete transit mixer wants to cross over...
On many Occasions I am Asked to make a calculation to certify if a load ( truck or crane ) is safe to pass over a burried cable or burried pipe, can any one help on the basic concepts used for such calculations?
is just the load divided by the area? what effect does the depth of the burried item...
Hi Guys,
I need help regarding a situation I have on site as below;
I ( client) am using a epoxy-urethane sealant in the concrete movement joint between two floor slabs, do to wrong application two defects appeared 1) a crack in the sealant appeared( in the middle) and 2) the sealant seperated...
