correction from the above statement." UNLESS OTHERWISE NOTED WITHIN THE CATIA DATASET, ALL PARTS ARE LOCATED TO A SURFACE PROFILE TOLERANCE .0600 RELATIVE TO PRIMARY DATUM A, SECONDARY DATUM B AT MMC, AND TERTIARY DATUM C AT MMC." How to inspect a profile tolerance for a big assembly.
Hi,
I have an assembly drawing that state "UNLESS OTHERWISE NOTED WITHIN THE 3D MBD CATIA DATASET, A SURFACE PROFILE OF .030 QUALIFIES DATUM A (PRIMARY). A SURFACE PROFILE OF .030 WITH RESPECT TO DATUM A QUALIFIES DATUM B (SECONDARY). A SURFACE PROFILE OF .030 WITH RESPECT TO DATUM A AND B...
kenat,
The holes from the channel will be match drill on the assembly. Using the 2 Da holes on the top assembly and 2 Da holes on the bottom assembly. How to make sure that the holes pattern from the detail will matches on the assembly?
Jean-Paul,
Attached is a picture of the assembly I was referring on my original post. Detail part is release and I am working on assembly. http://files.engineering.com/getfile.aspx?folder=0dd0a151-9ef3-47a5-80df-aff590410a7f&file=longeron_assy.jpg
PartNotex | UNLESS OTHERWISE NOTED WITHIN THE CATIA DATASET, ALL PARTS ARE LOCATED TO A SURFACE PROFILE TOLERANCE OF .0600 RELATIVE TO PRIMARY DATUM A, SECONDARY DATUM B , AND TERTIARY DATUM C. EXCEPTION FOR DA LOCATED DETAIL PARTS, THE DETAIL PARTS TAKES PRECEDENCE FOR PROFILE TOLERANCE. | URL
Hi Belanger,
How do you add picture in the attachment. When I click on attachment below nothing happen? I am reading about virtual condition and I have found 2 the virtual size of the pilot hole to be one to be .128+.0140=.142 for hole to hole and perpendiculariy relative to datum A and...
Hi,
I have a detail part with 4 pilot holes .128-.132dia with a pattern location of .0560M|A|B|C and hole to hole of .0140M|A. The bracket detail will be installed on the 2 longerons assembly upper and lower as shown in the picture. ME want the 2 hole to be pre-drill with .128-.132 on the...
Hi,
I would like to know if someone can help me to start a rule to find parameter value "A" and replace with parameter value "B". Also I would like the script to seach for Hole Requirements parameter and if is = A value then replace with B value. If Hole requirements is C value then replace...
