Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. rowen01960

    Resin infusion and resin content

    An additional consideration ... FV can and is "tailored" with the use of rigid/semirigid IML tools thereby controlling the infusible volume... the volume can be controlled modified with a vacumm sealing chambers on removable "hard" stops. You are only limited by budget and imagination. robert
  2. rowen01960

    RF Transparent Aircraft structural/control surface designs

    Kevin look at http://www.afcsat.com/ you need to identify the acceptable transmission loss (db at the required frequency range). You will most likely need to do some impendance matching using AQII fabric in a CE matrix. ( I have not had seen stiffness loss only weight gain!) same old...
  3. rowen01960

    Dornier 328 slush protection covers repair

    Andy I spent 5 years in Wessling starting with the 328JET conversion and then laying out the 728/928/528 empennage. Dornier took DTA "crack propagation" very seriously with regards to ClI/II laminates. I suspect that the restiction on splash plate coverings was due to an ability to inspect for...
Back
Top