hey
we just received our API 6A,from the time i applied to the reciept of 10 months. if you get 2 or 3 mounths after manual approval, your doing real good. are you in US??
Just for information to the subject.
API 19th Edition states page 60 clause c.
"The manufacture shall specify and verifiy critical dimensions.
Acceptance criteria for critical dimensions shall be as required per the manufacture's written specification."
The system that i have established for a number of different companies. write a procedure that currently covers how you handle cnc tape and log control.
Each tape location (software / hardware )
tape number / rev level, part number rev level, drawing number rev. level (if different from the...
hey i might be alittle too late in response buuttt
acording to ISO 2859-1:1999
the answer to your question of AQL is 2.5
page 20 table 2-A lot size 3201 to 10000
with S-1 inspection level sample size of 5 AQL 2.5
Accept 0 findings reject lot with 1 finding
or General inspection level 1...
Thanks for the response, final results indicate that the defined specification was wrong and the supplier was right. Just have to step in it sometimes.
thank again
I have specification with a requirement of 65a to 75a shore hardness. The product I received MTR indicates 65d scale. The supplier laboratory reports indictes 65d scale. I have a NCR generated. The supplier claims the materisl meets the specification. I need some clarification. Thanks
Hi Guys, Need some help understanding, Documentation History, API 6A 19th ed. Annex L. page 377 note. The sharp vee thread is specified in API BUL 5A october 1944, Table 9. this document is still valid in desigining gages. Page
378 ref dimensions for 2 1/16 out. Now API 5B 14th, page 42, 52, 54...
The gage has to be set to a working master at a test lab.
The report you receive will have an offset dimension. This dimension and API 6A 19 Section 10.2 page 140 and page 379,and API 5B, and API BUL 5B, will help you establish your gage points and tolerance. My question is what is exactly...
Hi Guys, Need some help understanding, Documentation History, API 6A 19th ed. Annex L. page 377 note. The sharp vee thread is specified in API BUL 5A october 1944, Table 9. this document is still valid in desigining gages. Page
378 ref dimensions for 2 1/16 out. Now API 5B 14th, page 42, 52, 54...