Search results for query: *

I've experienced the same and more... Loose right click completely or right click changes to an obscure context menu, Edges become completely un-selectable despite filters are set correctly, etc. Very infuriating. Hopefully Siemens stops making interface changes, and starts fixing bugs. --...

Hello, I have a main view used in Drafting (drawing) that was custom oriented to the equipment and not the die draw of the part. It appears at some point all the original guides were removed from the model that created that view. Is there any way to easily re-create the axis/lines from a view...

Thanks again Cowski. I made it work with formatting except for an issue with trailing zeros. The string (or NX) keeps cutting them out which is causing issues with the formatting. Googling trailing zeros isnt getting me far. Any suggestions? Thanks -- Design Engineer NX 11.0 CATIA V5 R26

Thanks cowski. I had not thought about utilizing GD&T frames. However, is there any way to either keep the vertical walls inline and/or remove the horizontal middle lines? I think this actually may have better potential for my use in drafting if so. Thank you -- Design Technician NX 9.0 with...

Hello everyone, I have a Journal file that allows me in drafting to click a point, and add a note with leader containing the X, Y, and Z value of that point (see below) that was based loosely off of another that created a table of points. Now I was asked to remove the "Point #" part, and list...

MFDO- That is exactly what I am looking for except not in NX. Toost- That maybe what I am looking for, but in a bundle I must not posses. Any other options out there? -- Design Technician NX 9.0 with SmarTeam Integration. TeamCenter 10 CATIA V5 R18-R24

Hello, I have tried searching around, but am coming up short on any software or function (NX or otherwise) to be able to easily take a part and see how a duplicate would stack on it. Think a cup for example, determining the spacing that would occur between each cup in a stack or if the objects...

Thanks LOCHNAR. I like the possibilities with it. Unfortunately I ended up with 17sets of the same 14-colors. Thanks again -- Design Technician NX 9.0 with SmarTeam Integration. TeamCenter 10 CATIA V5 R18-R24

Thank you Toost. This method does work. Unfortunately it is limited to 5 colors (2+, 2-, nominal), but other than that I am able to still able to get something out to the other engineers. If anyone has any other ideas/suggestions to expand on this, I would love to hear them. Thank you again...

Searching through the WWW, I found an article that suggests you can export a model using the Mold Wizard functionality with the faces colored to your draft analysis (linked below). However the posting is vague and I am unable to follow it. Is anyone aware of this/a method to export a model with...

To clarify, I still require the use of -> Export -> To Briefcase, as this is a requirement for sending data. Joe, would your method allow me to baseline a file into a JT file? -- Design Technician NX 7.5, 8, and 8.5 with SmarTeam Integration. CATIA V5 R20-R22

Hello, I am looking to start designing parts within Teamcenter (Version: 8). However a requirement is to export baseline versions to customers with the parameters removed (dumb solid). Is there a way or setting within Teamcenter that when a baseline is created, the supported model is converted...

Thanks PhoeNX for looking into the PAX. I did some for evaluation of the template files and found that the issue; it was do to the sheet setup being set for the metric templates to inches to achieve A & B size drawings. Once I converted the sheet size to metric of the equivalent A/B size sheets...

Joe, I just verified, the templates are marked as templates, and if I try to insert a A0-A3 (NX default) sheets in my PAX, they work great. Thanks. Kyle -- CAD Detail and Designer II NX 7.5, 8, and 8.5 with SmarTeam Integration. CATIA V5 R20-R22

From what I can tell, no. Loading "C:\Program Files\Siemens\NX 8.5\ugii\templates\ShapeNX8.5\dwg_b_metric_ns.prt" which was saved in NX V8.5 Read in all for part "C:\Program Files\Siemens\NX 8.5\ugii\templates\ShapeNX8.5\dwg_b_metric_ns.prt", cpu 0.032, real 0.032 Partition info: RM:1...

I am trying to use a PAX file to control the templates available for my department, both New templates and Insert Sheet. The New template command seems to be working with my PAX file, and the Insert Sheet command shows all the templates, but will not actually load in the new sheet. If I leave...

John- I am referring to the Drawing Templates. I wondered if it was something with Dialog Memory, but each time I open NX or another file new, it returns for the drawing template menu to stand alone and metric. -- CAD Detail and Designer II NX 7.5, 8, and 8.5 with SmarTeam Integration. CATIA...

Hello, Hopefully this is a quick easy fix; I have uploaded the company templates, created the PAX file, everything looks good, but when you go to File -> New, under the tab I have created for our templates, the default filters always are on picking "Relationship: Stand-alone Part" and "Units...

Any luck Jerry? -- CAD Detail and Designer II NX 7.5, 8, and 8.5 with SmarTeam Integration. CATIA V5 R20-R22

Not looking so much to auto size the column width to the image, but rather auto size the fill (image) to the variable cell width. -- CAD Detail and Designer II NX 7.5, 8, and 8.5 with SmarTeam Integration. CATIA V5 R20-R22