Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. the bloody clark

    curves and straight lines .

    the load will be hung from the middle point, it's going to be bricks . the minimum height is to be 12cm, minimum length is to be 56cm, minimum area of cross section is 288cm^2 it can have a floor . the point is is it better to support it with the 2 blocks or should I increase the radius ?
  2. the bloody clark

    curves and straight lines .

    let me clarify, I'm working on a project where I'm supposed to make a prototype for a tunnel made up of recycled materials that can withstand load up to 15kg, and its maximum deflection shouldn't exceed 1 cm so the only forces acting on the prototype will be the weight the length of the...
  3. the bloody clark

    curves and straight lines .

    but why the curve makes a problem ? " Actually I need a scientific base so I can put it in my research paper "
  4. the bloody clark

    curves and straight lines .

    " That's what I mean by supporting the semi-cylinder with two blocks in the form of cuboid underneath
  5. the bloody clark

    curves and straight lines .

    Ok so as an engineer if you were to choose between constructing an object made up of straight lines ( cube, cuboid, etc.. ) or constructing an object that is made up of curves ( cylinder, sphere, etc .. ) which one would be easier to do and less consuming to the materials ? if the design you're...
  6. the bloody clark

    HDPE tensile strength

    yes but will it increase the tensile strength or it will be affected ?
  7. the bloody clark

    HDPE tensile strength

    after researches it turned out that hdpe is a good material that can hold load, waterproof and doesn't react with a lot of chemicals , the minimum used materials should be 2 and they both should be polymers so we must add something to hdpe and if we must add something to it better be something...
  8. the bloody clark

    HDPE tensile strength

    If we add anything it will be during melting it in order to mix them together
  9. the bloody clark

    HDPE tensile strength

    well we thought about talc but it turned out that they need a polymer and talc isn't so we don't know what to do
  10. the bloody clark

    HDPE tensile strength

    Evening or morning I don't really know, anyway we're supposed to make a small prototype of a tunnel from polymers that can hold up to 15kg , as we've selected HDPE as a material but we need something else with it so what could be added in order to increase the strength of it in the form of...

Part and Inventory Search

Back
Top