Hi! I have done the timing, took me the whole day of struggling since the cam kept slipping, but got it tightened down when I took my time! Started the engine all 4 cylinders are firing up, and they seem to work fine when i rev it up. Now another stupid thing that happened, bike doesnt idle, and...
Thank you! I will give it a 475th try when I come back from work. :D
I will tighten down them evenly.
Also, any tips to hold both camshafts in place when tightening them down? They move off slightly which in my opinion causes the sprockets not to be alligned?
Hi, i had to take the cyl head out to fix a stripped spark plug thread. Now ive put it back on, and i came to the step for timing. I am following EVERY SINGLE step, what it says in the manual,
and i just cant get it right. Now ive got few questions, and a video with few photos to help you guys...
I do not trust myself to strip the engine.. I am doing motor vehicle maintenance and repair, and i do know how to do it, but last time ive replaced rings on my old bike, the engine just seized. ( it was bad cam bearing anyway) But this particular engine is quite an expensive one to fix. I will...
Heeyo, i`m not quite sure what that would be. I have yzf r125 with 15k miles on.
So - it starts to smoke at certain rpm. Like 7-8k and above. As ive done the video i held the revs at 3k, nothing. 6k - nothing. Above 8k - smoked like bob marley.
As far as i know this could be valve seals? If it...
So! What i have found out tonight :
Took the cylinder head off. Checked for excessive freeplay on rocker arms - they are in great shape. Camshaft doesnt seem damaged so as its bearings.
-Turned the engine over quite a few times while holding timint chain on my finger - ive heard no sound and it...
So! Im surprised that there are many friendly and ready to help people! Thank you all so much for advice!
- Ive set valve cleaeance to manufacturers specs, still the same thing.
- I did suspect the springs that are worn, it could be it!
- This bike has no service history, and i already did 13k...
VIDEO OF THE SOUND
https://youtu.be/4y1sudRXe3g
Hi, I`m completely lost. I`m studying mechanics but this is just out of my league. So this is Honda Cbr 125 RW7 - Fuel injected version. I Have replaced piston rings, head gasket, and cam chain tensioner adjuster to a manual one. Havent touched or...
