Hello,
I am conducting a harmonic response analysis of a shaft. I put point masses for corresponding rotor parts to include mass and inertia effect. I applied "rotational velocity" in the modal analysis and "rotating force" under Harmonic response section.
My problem is, during rotating force...
Hello gents,
I have run Explicit analysis simulating drop test. I used hex dominant method(mostly) to mesh and ran mesh refinement process to validate the results.
Looking at the critical surface which hits to the ground i observed the highest stress values. Notewithstanding during decreasing...
Hi there,
I have run several modal analyzes on the same model with different mesh sizes. Eveery time, i change the mesh size (gradual decrease) i get different mode frequency and displacement. My questions to experienced users:
1. First of all, why do i get different frequency and displacement...
Hello all,
I would like to simulate real drop test in ANSYS environment for my batteries. Basically battery will exhibit "free fall"(no initial velocity) from 1,5 meter height to the concrete floor.
My questions are:
1. Which analysis type i should prefer? Implicit/explicit or transient?
2...
Hello Kaushik,
I came across a video in popular site recently which i can advice you to go through.
The video belongs to SapanPatel and if you type "sapan patel rotor" in the search bar, you will get there.
Cheers,
Hakan
