Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: DPJ
  • Order by date
  1. DPJ

    Programmable sine wave

    Hi does anyone know of an equivalent to a Fairchild ML2037 programmable sine wave generator as they no longer make this part. Many thanks
  2. DPJ

    Sine wave generator

    Hi Can anyone tell me who makes digitaly programable sine wave ic's Many thanks
  3. DPJ

    Sine wave generator

    Help I Need to produce a good quality variable sine wave of 20V between 25kHz 150KHz can anyone help Many thanks
  4. DPJ

    Analogue Mulitiplier

    Hi can anyone help I'm using an AD633JN analoge multiplier which is to expensive. Can anyone suggest alternatives (Im using it as a sine wave phase detector) many thanks DPJ
  5. DPJ

    Tuned coil

    Hi Can any one help?? I Have a tuned circuit which needs to be varible (25K-100K) I've tried varactor diodes which only seem to go up to 100pF which is not enough I need at least 2nF, is there a way of increasing the capacitance. Or a simple way of making a bandpass filter which is controled by...
  6. DPJ

    24v AC Input to 5v logig output

    Hi Can any one tell me if there are off the shelf IC's that will take a 24v AC input and give me a 5v out put Ive been using Diode,cap and opto isolater but would like to cut down on components
  7. DPJ

    PSU and TRIAC control

    Many thanks for replying. The power supply has a 24v Ac Transformer 0 rail is grounded 24v rail comes through a 33 Ohm res then through a diode (Half Wave Rec) smoothed by a 220uF cap then to a 12V Reg Then a 22uF cap + 100nF followed by a 5v Reg at this point there is a 10uF cap. The problem...
  8. DPJ

    Square Wave to Sine Wave

    Hi Can any One Help I need to convert a varable Square Wave Between 25Khz to 100Khz to a varable sine wave and if possible keeping constant amplitude any help would be appriciated.
  9. DPJ

    PSU and TRIAC control

    Dear All, I need a power supply circuit run from 24V AC using a common ground for TRIAC firing. Unfortunately, with the one I have at present, when I turn the TRIACs on and bring on mains voltage contactors, I get HORRIBLE spikes in my 5V supply to my micro. I cannot use contact suppressors as...
Back
Top