Hello,
I need an assembly saved twice, they will have identical components but different part numbers.
As one will be saved for the customer with their P/N's and the other for internal use.
If I use the save as, it will rename that component in both assemblies.
Do I really need to copy the prt...
Curious, since my latest upgrade to NX12, I noticed when creating a pdf that my points are coming in much thicker than the previous version of NX11. I have tried adjusting certain settings but they still create as thick points rather than the same as my line weights. Can anyone steer me in the...
Hello,
I was just asked if we can support EGD&T files. I am unfamiliar with such a term using NX.
Can anyone give me any information? any and all would help. I am assuming they mean GD&T within using the PMI but would like to confirm.
Thank you
Hello,
Is there a way to turn off auto regenerate? I use a local copy of NX11 and it works fine.
But when using a customers TeamCenter version, when I just move the cursor over the assembly it starts regenerating the whole assembly (turning every component one at a time magenta more than once)...
Hello, I have been bumped up to NX 10.0.1 and for some reason when I go to create a detailed view, I pick label as I have done in the past versions, but after I pick the center of the view I am going for, I then pick at the spot I am trying to place the arrowhead. Yet it automatically goes to...
Sheet Update (Out of Date) won't actually update???
I have updated the drawing and tried the sheet itself, yet the drawing will not seem to update and still says (Out of Date).
Has anyone else had this issue?
Using NX 9.0.2 Bacic_NX thru Start Panel
I am trying to put in an angular dimension, I turn off the Automatic Orientation before placing the dimension. I also can see the dimension as I want it without having to use the alternate positing, but if I move my cursor just a bit it jumps out to another angle and won't give me an option for...
Hello,
I can't seem to find where or how to change the tolerance text size.
I was able to change the dimension size no problem, but would like the tolerance to be equal size to the related dimension.
Is this something I can set in the options so every dim would come out the same, or do I have...
Hello,
We use two network drives at my place of employment, one is a common shared drive and the other is a engineering only drive.
Some of our customer parts (3D Models) are stored on the common drive, but our internal assemblies are stored on the engineering drive.
I continually have to...
Curious, I noticed when I open an assembly containing parts from a particular folder that the assembly will open except for the parts from this particular folder. When I change my load options and try to open the part again within the assembly or by itself I get this warning "A deleted or...
I have added four identical parts (call them foot plates) into my model.
I updated the drawing and in one view 3 of the 4 appear, and in another view only 2 of the 4 show up. I updated more than once, and tried changing reference set from model to entire part which didn't seem to help any. I...
I am trying to find out a weight to a complete assembly.
Do I need to change the material type in each individual part?
And if so how and where can I do this.
If I made such changes to the individual part, can I then see total weight in the assy?
Is there no tube command in NX7. I use it all the time in NX5. I know I can do a sweep with circles but was just wondering does it exist? maybe called something else?
I have used NX5 for some time, now using NX7.5
In NX5 you can use the oreint tool, to pick a face and the view will orientate itself to look at that view straight on, In NX7 I am having dificulties in doing so, it will not allow me to pick a face.??
I have existing drawing templates for different size drawings. Saved as .prt files, usually I just import part then edit my title block individually. I have been able to create Attributes for my format template, but when I import it into the new part file it does not bring along such attributes...
I have existing drawing templates for different size drawings. Saved as .prt files, usually I just import part then edit my title block individually. I have been able to create Attributes for my format template, but when I import it into the new part file it does not bring along such attributes...
