Hi all,
I want to run abc.cmf file in Hypermesh from command prompt. Which command should I use for this? I have found out for running .tcl files from command prompt as -
<altair_home>/hw/bin/<platform>/hw.exe -clientconfig hwpost.dat -b -tcl example.tcl
Similary can it be applicable for...
Hi,
I am doing frequency analysis using FE methods for a frame like structure. Natural frequencies and mode shapes are calculated with the use of 1D element considering simple frame structure. Now I want to validate the results computed with the use of 1D elements with actual experimental...
Hi,
I want to know the analytical procedure with the use of finite element method (i.e. matrix method) to find bending moment, shear force and deflection of an indeterminate (no. of unknowns are more than no. of equations) beam. I know two of the methods viz. force method and three moment...
Hi all,
I am doing static analysis of planetary gear system. For this I am using 2 steps. In first step Contact between gears get initiated and in the second point moment is applied on the planetary carrier point. In this static analysis my first step works well but in the second step error...
Hello,
I am trying to mesh few teeth which are in contact in mating helical gear pair. Is there any effective method which generates fine mesh without any errors and warnings? I tried seeding the edges of the teeth but it's not helpful as i want fine meshing on the few teeth which are in...
I am analyzing pair of helical gears in ABAQUS. I am doing dynamic analysis using abaqus/explicit.
can anyone tell me how to use substructuring and submodeling technique for this analysis?
Thank you in advance!!
how to perform analysis of 2 helical gears in contact?
are there any video tutorials available?
it would be helpful if anyone provides step-by-step procedure.
hello,
I am doing the simple analysis of bracket with 2 horizontal holes. i applied pressure on the top of the bracket and fixed the bottom of the plate in X-direction.
can anyone tell me, What does the error ‘Too many attempts made for this increment’ mean? and what would be the possible...
can anyone tell me about how to create substructures and submodels in abaqus? it is not much clear from abaqus documentation. it would also be helpful if anyone knows about some video tutorials about this.
also i would like to know how the submodel can be generated using pythion scripting.
