I was try to obtain a program:
select a component
the component will be copy in the other three position on the xy plane,
but it doesn't work at all. any tips?
Imports NXOpen
Imports NXOpen.Assemblies
Imports NXOpen.UI
Imports NXOpen.Utilities
Imports System.Collections.Generic
Module Module1...
i have use the program in this thread thread561-388210 for a while ,
and it work flawless.
(it change the cdf on every single file of an assembly)
Now i have change the computer
and on a new one does not work.
Any tips please.
I actualy work with NX 12.0.2.9 MP4
NX 10.0.3.5 MP3...
thread561-388210
Hi I try to use this journal but
sometimes it work fine , sometimes not (work only on a few part)
// NX 10.0.1.4
// Journal created by paul.turner V1 - 27/05/15
//
using System;
using System.IO;
using NXOpen;
using NXOpen.UF;
using NXOpen.Utilities;
using NXOpen.Assemblies...
I didn't understand which template uses NX when I OPEN a parasolid file.
(I say open because the result is an assembly)
I need to change the template because NX try to match the correct RGB color but in this case fail
without my custumized template.
NX 7.5 64bit
NX 9.0.3.4 MP4 64bit
NX...
I have to reorder completely the order of an assembly
for a customer.
There is any method to remove all the parameter from all the parts?
I need to mantain the attribute for the part list , so I can't
export a step.
any suggestion thanks
NX 7.5 64bit
NX 9.0.3.4 MP4 64bit
NX 10.0.3.5 MP3...
It's possible to check that all parts of the assembly
is set on the own last feature.
NX 7.5 64bit
NX 9.0.3.4 MP4 64bit
NX 10.0.3.5 MP3 64bit
www.studiotreccani.com
Good morning
Is there some way to catch the measure of the face and write it down with a leader
(without go to the modeling)
NX 7.5 64bit
NX 9.0.3.4 MP4 64bit
NX 10.0.3.5 MP3 64bit
www.studiotreccani.com
thread561-353249
i need to add another row attribute to this useful journal
but i haven't stand a chance to make by myself.
from cowsky:
'NXJournaling.com
'NX 7.5, will error on NX8 or above because "MATERIAL" attribute is now reserved
'A quick example of how to show an attribute value in a...
We had used this journal from cowsky, succesfully even with the NX9
but now with nx10 it doesen't work any more
I there's a possibility to make it work
(note the parasolid file is been created but it doesn't contain name)
thread561-345441
Thank's in advance
NX 7.5 64bit
NX 9.0.3.4 MP4...
I need to have my own "callout" that is a part of the "name part"
com0000_000_P001_EXAMPLE.PRT
i need to create a attribute MYCALLOUT= 001
inside the part for all the part of the assembly.
i find this thread but i don't know how modify this.
thread561-365279
thread561-316998
I need to do that to...
there's a trick to export automatically a step or iges from an assembly , for every single name part?
Yes i know there's an external tool (fantastic for main part), but when i need to export the screws or ejectors ecc.. whith the external tool, obviously it export a single part with own WCS.
Now...
This macro doesn't work in the same way.
In NX 7.5 after change the option in "change window"
to "contain the characters you type" and set immediately after each..."
came back to "change window" with the cursor ready in field of search text.
So when i run the macro (with a short cut) I can...
Good morning
we are ready for upgrade to NX 8.5 or NX9
meanwhile we wanna upgrade the workstation
with this one :
HP z840 six core k5200
with six core E5-2620 v3/2.4 ghz
32 gb ram
sata 600
2 250gb ssd
nvidia quadro k5200 8gb kepler
microsoft 7/8.1 64 bit profesional.
We have doubt about the...
thread561-354838
Hi
I've have tried the Iklo vb.
see the thread above.
Realy good.
There's a possibility to make it work on a "work part" (of the assembly)
even i'm in the assembly (displayed part).
Thanks in advance
NX 7.5
www.studiotreccani.com
I have to open more than 100 part and change the color palette (i just have the right .cdf) of every single part,
because when i export a STEP of the entire assembly the color is take from the single part.
The costumer want the right color for CAM purpose.
nx7.5
win 7 64b
We often import part from our suppliers,
and than rename the component.
At the end we export the work in parasolid... and surprise
some solid have the original names of the supplier.
The only place where i have see the original name in NX is with the command
"optimized face".
Anybody know how I...
4 Studies Show that Using a Second Monitor Can Boost Productivity...
I agree at 100% with this idea.
I use this solution since 3 year ,
and i realy boost my work.
This want to be a suggestion or a discussion.
Advantage for me:
Catalog on the second monitor.
Other program on second monitor.
stop...
thread561-332871
I found this journal,
I can not add the same window
other attributes to be modified.
for example:
CATALOG
MATERIAL
MW_STOCK_SIZE
and maybe highlight the name of
part in the window.
if someone wants to help would be great
nx7.5.3.3
xp 64bit
I need to add a column in the part list of the assembly , that have only a portion of text
of the part name , like this 5555_01.01.03_mounting_plate --> 01.01.03
or if is not possible 5555_01.01.03
because i need this string for the callout (my customer need this string in the callout)
thanks...
