Hi, I work at a hospital with a simple 4hp, Ceiling Concealed Fan Coil unit serving a small 50 sqft room, oversized of course.
And yet, it's too warm inside (27'C) for staff comfort...(21'C - 24'C is desirable).
AIR PATH:
FRESH AIR IN -> EVAPORATOR -> HEPA FILTER -> BOOSTER FANS -> 10ft DUCTING...
Hi,
I've attached my calculations for an atmospheric EN14015 1000m3 steel tank with an emptying rate of 1440m3/hr.
The trouble is with the sizing of the vents (read some of the other threads on this, and have been trying to find a suitable equation to determine the actual flow capacity of a...
Bought about a whole lot of 3m long 450mm reinforced concrete pipes to be used as protection for my ductile iron pipes, which will be running up to a 100m under a main road.
Ran into two problems (and I still want to utilise those pipes):
1. If I place my two DI pipes, or even just one DI pipe...
The datasheet provided of an atmospheric condensate storage tank was provided by a contractor:
(1) Design Temp: 70degreesC
(2) Operating Pressure: -0,05 - 0,35 barg. (I bet this means -50mbarg to 350barg)
(3) Tank MAWP [bar g] = Geodetic Height + 500mbarg Nitrogen Blanket / -20mbarg
My...
PROJECT:
Country: Bangladesh
Relatively high salinity in river - located about 1 km away.
Windspeed: zero
Temperature: 16C - 33C dry bulb
Humidity(seasonal): 40% - 80%
Design criteria hierarchy: Performance > Cost
My problem: I need to present the differences between two different WATER...
Does anyone know which standard is pertinent to the design of an access staircases exiting a fuel oil tank's bund? This is a fuel oil storage tank located in an electricity generating plant. Capacity is 3,300,000 litres. Bund is 40m x 40m with a 3m wall.
Just cant seem to find a specific...
hi, i'm starting this thread because I'm in a design dilemma and also for others who face similar design issues.
____________________________________________________________________________________________________________________________
Just let me get excerpts from my report up here:
REPORT...
