Hello,
I've been told there is a trick to change the default NPT thread angle in the drafting views.
By default it is 3° but we need to change it to 1.7899106°
Maybe a UGII environment variable ?
See thread561-335093
Thank you
"My english is bad ? That's why i'am french."
Hi there,
On NX 9.0.3.5
I am trying to constrain a closed spline within a sketch.
I added dimension for each thought point but they are always 2 constraint needed.
I usually really good a this but here I don't understand why NX require 2 more.
Even the "continuous Auto dimensioning" can't...
Hi NXiens, NXiennes
Under NX 9.0.3.5
I am creating a "Master drawing" and want to put as much as possible automation in it.
All is almost OK, when my assembly is changing, most of the dimensions and notes are well placed.
But I am facing a problem with the "Break-Out Section view".
The...
Hi all,
I have a large assembly, 494 objects, 500 assembly constraints (AC), but a lot are pattern.
I am grouping the AC according to status.
Error (0)
Warning (0)
Info (0)
OK (500)
In this assembly, I have a flange cover (pastel orange), place with two constraints (orange):
- concentric
-...
Under NX9.0.1.3
Look at the status bar when doing a "save as" (outside TeamCenter).
http://youtu.be/SVy73xYjF6Y
I have this refresh bug on two completely different workstation, one with a FireGL, one with a Quadro.
I even now upgrade my Quadro graphic driver for the one certifier for NX9...
Dear all,
NX 9.0.1.3
I discover something important in "Deformable part" this morning.
I have to share it here.
Maybe it was already explained or reported, I don't know, here it is.
We have and "arrow". Manufactured flat, from a sheet metal, but then wrapped on a cylindrical faces in our...
NX9.0.1.3
Wasted time trying to figure out what does prevent NX of moving a sub-assembly.
Watch de video below.
1 - adding a new sub-assembly
so, there are no assembly constraints ATT ALL involving it.
2 - try to move it with "handles"
"You're trying to move a fixed component" ???
3 - maybe...
Hi there,
Discovery/Learning the Parts List feature (Inside TC).
I'am now able to select component I'd like to see / not see in the table.
I know how to select the fileds / attributes I want. Good.
The "CallOut" thing is still obscur.
Are they randomly chosen ?
How to re-attribute them ?
I've...
Hi folks,
A question about "linked face".
We are under NX 9.0.1.3 and TC 9
As we activate the "Fix at current Timestamp", the concern "Linked face" stops to synchronize.
Does using the "Fix at current Timestamp" should stop the synchronization ?
Can I understand this "fix" as - we are fixing...
Since upgraded to NX9, when we are using a formula for any dimension field, we have to use the "Formula Editor" to modify it.
I can understand it's a good thing if this value is really compute or conditional and used in a "Master Part" so lower level drafters don't mess up.
But, as i'am...
Where are manufacturing splitted fittings to be wheelded on pipes.
On your drawing, we have to specify the weight of the upper, lower and full model. (for handling / shipping)
For that, i'am using the body measurement feature and fill a table with his expression.
When we are reworking the...
Hi there,
I'am creating a 24" device starting from an already existing 12"
I did a clone assembly for that but forgot some drawings.
I'am now mixing files and replace component, everything is fine until this.
I'am having a drawing file with 2 models (Master model concept) :
- 1 sheet for the...
Hello,
Is there a way to add a direct "extension & arrow display toggles" on the quick dimension options ?
Because hiding them in NX9 became much much much longer than in NX8.
We really liked the "Annotation style" panel in NX8.0
It was very visual an intuitive. Nearly all cosmetic settings in...
If I place dimension over the "solid area" of the model.
It become really difficult to select it as the "infer" selection tool give a kind of priority to the solid model.
I have to wait for the "QuickPick" and select the dimension.
After that, I double clic and I'm able to change options but...
Hello,
Upgraded from NX8.0.3 to NX9.0.1.3 during the week-end.
In NX 8, the "inferred" dimensioning tool was smart enough to detect cylindrical face and place his diameter.
"Fly over" the cylincal face, select it, place the dimension. 2 clics and it's done.[thumbsup2]
In NX 9, the "Rapid"...
Hello there,
Is there a way in NX8 to script expressions values as the PTC Creo "Relations" doing ?
I found that more conveniant if you have a lot of IF conditions.
Ex, in Creo :
if idtalf_xwf == 0
angif_xwf=30
cd1wxf=epf_wf*tan(angif_xwf)
idtalf_xwf=2*epf_wf+2
talf1_wf=talf_wf...
Dear All,
I have a problem using deformable part.
I'am designing an arrow, cut in a sheetmetal, used to indicate the flow direction on our product.
Most of the time it is screwed on cylindrical face.
In my part they are two solid.
A flat one, for drawing purpose.
And a curved one, made by...
Hi,
I'am in charge of designing "Master model" in my company. (Yes, that's soooo coool !)
Most of our product are using the same shape and differ by their dimensions.
So, ideal for 3D parametric modeling.
No issue with the 3D and i'am using the "Visual Editor" to have a user friendly interface...
