When a pipe line is installed to a pump flange there can be some due stress put on the pipe as wells the pump flange if there are misalignment in the pipe line. Can some expert here point me in the right direction on how I can come up with the load that will be put on the pump flange.
Hi, I am working on calculating what the end load / nozzle load would be and I coming up with a really high number.
Based on a 25' pipe and change in temp of 50F this would calculate to about 1/8" thermal growth.
Below is how I came up with the end load. Would be great if someone can chime...
I know typically high strength bolts are not to be zinc galvanized due to hydrogen embitterment, what coating options can be used to prevent rusting due to weather?
Typically these bolts are to be plain/black finish. Which means no coating, maybe a slight dip in oil.
I have some of these...
I would like to calculate the change in axial length in a pipe full of water when the pipe is pressurized.
Could anybody provide the formulas or advise where I can find them? I assume this number would be very small in a 100' run of pipe.
Ratio r/t>5 --- Longitudinal Stress = Pr/2t
Thanks,
Hi, I need some help calculating torque required to seal elastomer fabric flange. I am new to this and need some help.
Pipe ID = 12"
Pipe OD =19"
Pipe BC=17"
Bolt Hole = 1" dia 12 holes
Bolt Dia =0.875"
Retaining Ring ID = 10"
Sealing Area = 518.25 in2 (Pipe OD Area - Ring ID Area)(excludes...
