Hi guys,
I am looking to find a guide to carry out a structural assessment anchor studs to BS5950.
Two anchor bolts diameter of 24 mm are bolted to a 40 mm thick steel plate dimensions of 200 mm x 200 mm. is there any guide to do that?
Thanks.
I aim to mount a rectangular, long, steel section to the wall, using 3 steel plates. The 3 steel (arm) plates will be welded to the steel section to the one side, and then use bolts to mount them to the concrete (rigid) wall. What size of bolts shall I use?
Hi guys,
I have a steel pipe with the dimensions shown below:
Length of the pipe = 6.4 metres.
External diameter = 2.48 metres.
Internal diameter = 2.46 metres.
Self-weight of the steel pipe = 6766.85 kg (uniform steel pipe).
A steel door of 120 kg is bolted to the right side of the steel...
Hi guys,
I have a steel pipe with the dimensions shown below:
Length of the pipe = 6.4 metres.
External diameter = 2.48 metres.
Internal diameter = 2.46 metres.
Self-weight of the steel pipe = 6766.85 kg (uniform steel pipe).
A steel door of 120 kg is bolted to the right side of the steel...
Hi guys,
I am performing a dynamic explicit analysis of a drop impact event on a beam specimen.
Is there any way that I can apply a pre-load force on the frame before the object drops on the beam?
Regards and thank you.
Hi,
I am trying to model a rotation shaft using solid elements. I have pinned the nodal points on the center line along the x-axis to allow rotation in the x-direction as shown below in 3D space. However, the rotation shaft does not seem to move when the analysis starts. The analysis is...
Dear all,
I would like to ask if anyone can help me with an issue that I came in contact with.
I am trying to model an impact event of a dropped test and I would like to model the gravity as well. The simulation consists of an analytical rigid surface for the projectile including a reference...
