hi engineers
i want to design a 20L reactor with 20bar pressure and 200c temp and on top of it there is a STD. 10 inch blind flange. there should be a mechanical stirrer mixer in the reactor and i should consider an opening on the blind flange but i dont know how much diameter i should consider...
hi
what is the technical and theoretical meaning of this statement in ug-28 of asme bpvc?
in other words whta happen when value of a falling to the left of the mat./temp line?
For values of A falling to the left of the material/temperature line, see Step 7.
Step 7.
For values of A falling to...
hi
in one of our project when we wanted to insert and fit up and weld the nozzle to the shell we founded that the hole is larger than the OD of the nozzle. are we allowed to weld overlay to fit it and use the present wps or we should do s/th else?
is there any reference that prohibit or allow...
The distance between two longitudinal seams in the adjacent shells shall not be less than 5t where t is the thickness of the thicker joint as per API-650, I wanna know what should be the distance between two longitudinal seams if they are in the same shell? off course it depends upon the...
hi engineers
i have found a dicrepancy in ucs-66 and i would be so grateful if u clear this gray area for me.
due to the fig ucs-66 if the thickness increase the mdmt temp decrease and it makes sense cos if the thk. of the plate increase the toughness decrease.
but due to fig ucs-66.1 if your...
