Hi, guys!
I am studying the influence of the bending and torsional stiffness of BIW on the handling. The process is as follows:
(1) Obtain the mnf file of the BIW by HyperMesh (CMS);
At this stage, to simplify the model, I removed the seats, doors and interior. In order not to change the...
Hi，Guys!
In FE model, I use the 0d element "CONM2" to ensure that the center of mass and inertia of the model do not change and use the 1d element "RBE3" to connect "CONM2" to the rest of the model. After it, I will use HyperMesh to output the mnf file, which is used for rigid-flexible coupled...
Hi, guys!
I want to build multiple curves automatically in HyperGraph through secondary development. But I find that the API command "pltIBuildPlotsCtrl GenerationPlots" doesn't seem to be able to generate curves. Please help find the reason. The core codes are as follows:
[highlight...
Hello guys!
I built a rigid-flexible coupled vehicle model for handling and stability simulation. The flex part is the chassis(or the body).I carried out the following four simulation conditions for full-vehicle analyis:
(1)step steer;
(2)constant radius cornering;
(3)swept_sine steer for...
Hi, Guys!
I am using adams/car to do the simulation of vehicle handling and stability. Firstly, I obtained the mnf file of BIW through HyperMesh. Secondly, I built a rigid multi-body dynamic model to output the reference curves. Thirdly, I deleted the rigid body part that characterizes BIW and...
