Greetings,
I have a detail that I need to place 2 holes into it. I would like to use features from the assembly where this detail is installed. Is this possible to do this?
Thanks,
Brent
Greetings,
2-Fold question on Detail View
1- After I've created a Detail View, I added a component outside its boundaries and need to enlarge it
* I do not see an option to allow the size to change
2- One of the Detail Views, I prefer it be rectangle. I see the rectangle...
Greetings:
I am drafting a part, and created a section view to expose specific holes that I want to describe from within the section. When I select 3-D Centerline, the holes are not recognized to place the centerline. Am I doing something incorrect?
Thanks,
Brent
Greetings,
I have been assigned a revision to a drawing where the model uses different Arrangements to display how the tool is positioned at different stages of its use. How do you get to the dialog that allows you to modify the numbers in an Arrangement?
Thanks,
Brent
Greetings,
When opening a drawing file or a model file, NX puts you in a mode that is not Modeling or Drafting. Does anyone know what this stage is called and what its purpose is?
Thanks,
Brent
Greetings,
How do you change your drafting to show angles with decimals instead of degrees. Not just one angled dimension, but anytime you select an angle dimension, it will be in degrees?
Thanks,
Brent
Greetings:
I have a weldment assembly that is made up of several square tubes, each tube is its own .prt file. In each of these .prt files, I've layered out the coordinates, then turn that layer off. In drafting, I also set that layer to be invisible in the view. I still get a coordinate...
Greetings:
If you place a Detail View defined by a circle that you just simply make in custom size based what features you want to show in it, if you want to change its size (increase to show an additional feature) later, is this possible?
Thanks,
Brent
Greetings,
I have a sheet where I drafted with multiple parts in my assembly. When I open this file later, 2 of these parts are now not shown in the view, and I get the phantom red drafting lines because these are now disassociated to the detail it was once associated. The parts are in the...
I have an assembly model of parts that I am modeling. I use datums to in my parts model to design from. When I import the part into my assembly file, the datums appear. Is there a way to not show the datums in the assembly file of any part file where datums were used to design the part...
Greetings,
If I import a component into my assembly, is it possible to extract geometry from that component, then turn it into a non-associative body, then delete the component while keeping the extracted geometry copy?
Thanks,
Brent
Greetings,
I used to model in a newer version of NX (1926), and have had to go backwards. When I place a Datum feature in drafting, and select a dimension line (or an object line) for the Select Terminating Object, the placement only allows me to drag across the length of the line only and not...
Greetings,
We have an assembly that involves a component that is labeled ug.12354.prt . The assembly when loaded says it failed to find file ug.12345.prt (notice the 4 and 5 are switched). The tree in the assembly file shows the incorrectly named file and is ghosted out. I'm not sure what...
Greetings,
I've created a couple of details that I named yyy.prt, then input those into my assembly. I now have to change the file name of the detail. Will my assembly keep relationship with the new file and drop relationship with the original?
Thanks,
BW
Greetings,
I've used later versions of NX before, and while in sketch, and dimensioning, I was always able to select a midpoint of a line and dimension it to something. With NX8.5, midpoint is not even an option with my current set-up. Is this an option to make available?
Thanks,
Brent
Greetings,
I have a section view that I just placed and the cross hatching is multiple lines at different angles. I would like to display just the simple hatch at 45 degrees or -45 degrees for bodies next to one another. Can someone help me adjust settings for the cross hatch?
Thanks,BW
Greetings,
I have stepped back to NX 8.5 from NX 12. When in 12, I could place a radial dimension and control whether the arrow was inside or outside the arc. I'm not having success finding this option in NX 8.5. Can someone give me a boost?
Thanks,
Brent
